Serie Polymer Insulated Heating Cables (PI)

The heat is generated at the center conductor according to the principle of ohmic heating. Various conductor materials are employed, depending on the required strength.

The output power and temperature of a PI series tracing system depends on the target application. The design parameters (type and resistance used, circuit length, applied voltage, electrical configuration, etc.) have a direct impact on the performance of the tracing system. For this reason, the design of the project and the selection of products must be entrusted to qualified personnel using the appropriate software. Any changes to these settings can be critical and require re-validation of the project.

Advantages: Numerous resistances available and possible configurations, Simple connections, PTFE resistance!

• Heating cables IPT